25 Nov 2015, 1:13pm
General:
by

Comments Off on Advertising And Manufacturing

Advertising And Manufacturing

Absence of advertising from the manufacturers use intermediaries, often posing as a producer. The easiest way to find the manufacturer, is to send an email to the calculation of the design project and get the value of your products. It is also not advisable to contact the company with deliberately undervalued. This could mean one of two things: either explicit publicity stunt company, with deliberately low-cost products, and further screwed when converted. Or Company manufacturer does not have enough orders, and agrees to any terms of the contract, barely eating is holding up. This option is fraught with possible bankruptcy of the company with all consequences. How to save on materials.

Conditionally savings on materials can be divided into two parts. The first savings on the front facade of. Furniture fronts, depending on its appearance can be smooth or filenchaty. In turn, the facade itself can be made from different materials, depending on appearance. There may be an array of natural wood is the most expensive facade, and can be used a combination of an array of + veneers or just veneer. Veneer consists of a thin slice tree with a thickness of 0.6 mm and different lengths, glued to the surface of particleboard or mdf.

Externally veneer facade, little distinguishable from the facade of wood and only a professional can give an accurate opinion of what material made your facade. Applying the combined method in your product you can get significant savings on the cost of the product. Internal content of the product. (Shelves, drawers, back panel) in the inner Content can be used for veneer or saving all the non visible (interior parts of the product) can be made of cheaper materials such as chipboard matched in texture with the main product. This will provide additional cost of your items, without losing the appearance of luxury furniture. Is it worth it to save on Furniture? The cost of furniture to order the same effect fittings, handles cases, guides for drawers, various bars and hang clothing. Here you can save money, but I would not recommend to do it. In the end, you can put Chinese cheap roller guides on the box, set the bar under the clothing of the same production, but after half a year of operation, boxes will no longer open, the rod starts to bend under the weight of clothing and you have to do furniture restoration, which costs very expensive.